Muro de ladrillos (Brick wall)

Bueno pues despues de ver un video en youtube sobre como hacer muros de ladrillo, se me ocurrio hacer lo mismo solo que mis materiales eran algo distintos y como lo voy a compartir en un foro internacional me cambio al ingles.

So after see come video on how to make brick walls i`ll tried to do the same, but had some diferent stuf, so here will follow lot of pics and short explanations, hope you al like it.

First you get a piece of pvc foam, 3mm thick, but 5mm will be great too, and mark the shape of the brik i made it 0.5cm each, then cut it a bit.

Then do the pattern of bric, i done it by cuting and then in diagonal making add cuts with an old cutting blade head, bo both side and will get some gap on it.

Use your mistakes and do some scartches or wall marks as shots, burns, grafitis...
then i used the cutting part of knife to grind some iregular forms (like if it was a polish tool, just make little scarthes on there) and not lay it like new, by my surprise it gives me a really cool result, with little marks on each brick.

The slowest part is to make brick pater and make it fells great, you must mind about joints of bricks couse if you cut in one direction the rest of the pvc will go on that making some kind of hill, so you better get it out with a sharp tool.

Now mark a broken area to cut it out. And finally spare both parts.

Use some glue you like and let im dry (i used aircraft plastic glue, and works well)

Can use remainig parts to give a litle bit of debris like above.

 Some ref pics with a 28mm ww2 airbone

Now is time to paint it up, so chose your colors, i will use, black primer, hull red (vmc985) , vermillion (vmc947) , scrofulous brown (vgc72038) and green ochre (vmc914)

Now dry vermillion

Now dry brown and ochre, so final result.

For mesures piece cut one rectangular sheet of 12.5x5 and after build it is 7.5x5x5.